The strength and distribution of clamping pressure is adjusted by two stops. Remove the Bottom Front Cover. Printer Parts Please use the following diagrams to identify each printer part. Wrap the ribbon around the Ribbon Shaft Rod and stick the ribbon onto the empty ribbon roll. It differs by the increased service life and optimal protection against external influences due to the mechanisms and case made of metal. Remove the two screws in the front.
|Date Added:||24 January 2010|
|File Size:||31.70 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Etiquette tape, continuous paper, fabric and polymeric carriers, cardboard, etc.
Table of Contents Add to my manuals Add. Label length set by auto sensing or programming. Page 19 Liner Rewind Sensor and the printer will stop printing until liner has been removed from the printer.
Please check the specific gofex mode, then go into the Setting Mode after power on the printer. Take the power cable, plug the cable switch to the power socket, and then connect the other end of the cable to the printer power socket.
Align the label roll with the Label Width Guide. Liner Rewind Sensor and the printer will stop printing until liner has been removed from the printer. The printer supports any Russian fonts loaded into internal memory with 2 MB capacity. Close the Top Cover to complete the cutter installation. Maintenance And Adjustment Chapter 5.
Godex EZ Plus label printing machine | TEA Industrial Adhesives
Backlit graphics LCD display: Open the top cover. Open the Top Cover of the printer, and turn the printer sideways. Pressing the Pause key while printing, printer will godec the print job, when the Pause key is pressed one more time, the printer will continue with the rest of the print job. For example, if the print job contains 10 labels, press the Pause key after 2 labels are printed to stop printing; Its features are as follows: The printing precision and imprint uniformity due to a patented print head clamping mechanism retains for a long time.
Don’t have an account? To print the manual completely, please, download it.
Godex EZ-2200 Plus Label Printer
Ribbon Tension Adjustment 2. Use the flat tip screwdriver to loosen the TPH screws A on each side of the print head counterclockwise for one circle as indicated by the Power on the PC. In the Self-Test Mode, the printer will print out a test sample each time when the Feed key is pressed. Barcode Printer Chapter 1.
Install the Rewinder unit. Remove the Bottom Front Cover. Also See for EZ Programmer’s manual – 22 pages.
This manual also for: By pressing ‘print’ button you will print only current page. One side of the printout not being printed clearly or ribbon wrinkle occurs, adjust the TPH Spring Box position or pressure to cure the problem.
Remove the two screws in the front. Use a flat tip screwdriver as shown in the photoand turn the screws B clockwise to move the TPH To do this, just connect the keyboard to the printer, select the desired label from the list downloaded, specify number of the copies and start printing.
Avoid pushing the guide too far in to damage the label edge. Wrap the ribbon around the Ribbon Shaft Rod and stick the ribbon onto the empty ribbon roll.